Raising

  • General Use Furniture Raiser on castors (no legs)

    General use furniture raiser on castorsThis item must be ordered using a retail prescription

    For armchairs, settees and beds on castors only. Blocks linked by an adjustable bar. Designed to raise the height of a client’s own chair or bed. A pair of units will be required to raise a chair. Additional units may be required to raise settees or beds.

    When ordering make sure correct amount of raiser units, spreader bars and clip on raisers are ordered.

    Multi-raisers are designed to accept corners, straight edges or curves on the furniture.

    For guidelines on ordering please see multi-purpose raiser reference guide chart.

    •     Width adjustment – approx 800mm – 1300mm
    •     Height raise range – approx 75mm – 150mm
    •     Minimum weight limit – 254kgs (40st)

    warning exclamation markWarning: Not suitable for beds or chairs with legs.

     

    Price approx £20

    Refer to retail tariff for further details

    Retail Model Order Codes:

    Support Unit
    1 support unit = 2 cups (for 2 castors)
    Order Code: FU02

    Spreader Bars
    Order code : FU02S

    Clip-On Raisers
    1 raiser per cup, order enough raisers to achieve required height for each cup
    Order code : FU02C

  • Chair Raisers for chairs with legs (with or without castors on the leg)

    Chair raisers for chairs with legsThis item must be ordered using a retail prescription

    Four cups linked by a frame with additional height adjusting blocks.
    Designed to raise the height of a client’s own chair.

    • Must have a safe working load of 254 kg (40 stone)
    • Can be fitted to give a height raise range – approx 75mm to 165mm
    • The height range is achieved by fitting the cups without height adjustment blocks, or by using one block in each cup or two blocks in each cup.

    warning exclamation mark

    The Multi Purpose Raiser does not replace this item.

     

    Price approx £20

    Refer to retail tariff for further details

    When ordering please state height of raise required (not height of chair).

    Retail Model Order Code:
    FU01

  • Linked Double Bed Raiser (pair) for Beds on Legs
    Linked double bed raiser

    Linked Double Bed Raiser (pair) for Beds on Legs

    This item must be ordered using a retail prescription

    Two blocks linked by an adjustable frame. Designed to raise the height of client’s own single or double bed with legs. Dependent on the design of bed, two, three or four pairs may be required.

    • Must have safe working load of 254kg (40 stone)
    • Height Raise range – approx 75mm to 165mmwarning exclamation mark
      The Multi Purpose Raiser does not replace this itemPrice approx £30

    Refer to retail tariff for further details

    When ordering please state height of raise required (not height of chair/bed).

    Retail Model Order Codes:
    Linked single bed raiser FU15S
    Linked double bed raiser FU15D

  • MacNish Chair Riser

    MacNish Chair RiserA raising unit added to standard static chairs. Can be fitted with vertical lift or lift and tilt. Maximum height can be set when fitting. Unit is screwed to underside of chair. Prescriber and technician required for joint visit when fitting. Read prescriber guidelines before ordering

    The unit is controlled by a simple hand switch, which will stop the chair’s motion when pressure is taken off the button

    • Vertical lift or rise and tilt option
    • Easily fitted and removed by technician
    • Uses your existing chair
    • Fits to nearly all armchair types

    warning exclamation mark

    Macnish chair

     

    Not to be fitted to Powered or Manual Rise Recling Chairs
    Note: This product must be ordered with a joint visit from Prescriber and Technician.

    Maximum user weight

     

     

    Price approx £300

    CES Order Code: HOS 0752